OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!

mdgm wrote:

You could see if an OS Re-install fixes the problem. If that doesn't it's possible your OS partition may be full or that something went wrong during the update. Did you have any add-ons installed? There is now a volume read-only boot option that has replaced the skip volume check boot option from earlier OSes. See http://www.readynas.com/kb/faq/boot/how_do_i_use_the_boot_menu You may be able to recover your data using the volume read-only boot option.

Dear mdgm,

Thanks for your reply!

1.) What would cause the OS Partition to become full? I have no idea what the status of the OS Partition was prior to attempting the update. I do know that the Data Partition was a tad less than 33%. . .
2.) NO. No Add-ons whatsoever. Matter of fact, I was planning to remove the Plex and Photo's Apps as soon as I figured out exactly how to do that :D
3.) I will look into the "volume read-only boot option" you mentioned above
4.) Would you please post a link (if there is one) for the OS Re-install procedures appropriate for my particular situation?
Edit: Please disregard #4 above. I just performed the OS-Reinstall from the boot menu. Unfortunately, it did not help :(

Any other suggestions? Is an OS reinstall from USB an option, or should I just go with the factory reset and cut my losses?

Thank you VERY much (in advance)!