OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!

ATCIS wrote:
Which leads me to three questions, which are: 1.) Why do you suppose the ReadyNAS thinks that this drive has issues when two different Hard Drive diagnostic programs say otherwise?

Diagnostic programs don't pay attention to ATA errors. ATA errors can be caused on some drives by simply sending the drive an invalid command. But we don't expect that to be happening on the ReadyNAS, so ATA error are out of the ordinary. If you have SSH, you can check your SMART data and ATA errors by running these commands:

apt-get install smartmontools
smartctl -a /dev/disk/internal/0:5*

ATCIS wrote:
2.) Does OS6 have some sort Hard Drive Database that remembers every Hard Drive that has ever been in it? 3.) If number 2 above = YES, is there some way to clear that data so that the ReadyNAS reassess the condition of a particular drive from scratch sometime in the future?

From SSH, run this command to reset the error history log:

rm -f /var/readynasd/smart.sq3