NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
On my legacy Ultra2 I had false CPU temp readings (serrated, like a wood saw, saying the cpu went up close to 70°C degrees).
Then I upgraded from 6.1.1 to 6.1.2 and I noticed an nice improvement in the CPU temperature reading that doesn't cause anymore the fan to ramp up to it's 2200rpm maximum (this is not documented in the release notes ; understandable if it didn't occur on ReadyNAS 3xx/5xx).
The inconsistent noise level was really annoying!! So I am now a happy OS6 user :woot: I didn't had to apply any command line fix for the temp reading neither fan speed the fan.
PS: see the full post with screen captures there : viewtopic.php?f=51&t=71155&start=57
Then I upgraded from 6.1.1 to 6.1.2 and I noticed an nice improvement in the CPU temperature reading that doesn't cause anymore the fan to ramp up to it's 2200rpm maximum (this is not documented in the release notes ; understandable if it didn't occur on ReadyNAS 3xx/5xx).
The inconsistent noise level was really annoying!! So I am now a happy OS6 user :woot: I didn't had to apply any command line fix for the temp reading neither fan speed the fan.
PS: see the full post with screen captures there : viewtopic.php?f=51&t=71155&start=57
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
