NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
Hi,
Well, I can believe that I'm the only one with this issue, but I didn't find a solution (neither in the forum, nor Google...)
I have a Ultra 2 running OS6 6.1.4 successfully.
But I can't activate alarms, because of the below alarm being triggered every 5 minutes
According to boot_info.log, the min value is 4,65 (90%)
Well, I can believe that I'm the only one with this issue, but I didn't find a solution (neither in the forum, nor Google...)
I have a Ultra 2 running OS6 6.1.4 successfully.
But I can't activate alarms, because of the below alarm being triggered every 5 minutes
V5_0 voltage in enclosure 'internal' is out of spec. (4,74V).
According to boot_info.log, the min value is 4,65 (90%)
labelvol1: V5_0
minvol1: 4.65
maxvol1: 5.35
So the current value is in the expected range.
Well, is their any solution to ignore this alarm ? Disable it ? Adjust the threshold ?
Any solution is welcome.
Thanks
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
