NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
walshlink wrote: ATCIS, do you have jumbo frames enabled on both your PC and switch? Are your PC, switch, and RNP all using the exact same MTU size?
I have Jumbo Frames enabled on all devices that support Jumbo Frames (PC's, Switches, NAS Devices, etc.). I have the MTU set at 9000 bytes throughout. . .
walshlink wrote: If you are using your jumbo frame-enabled PC to connect to both your storage device and the Internet, you Internet speeds will suffer as your ISP will fragment the packets down to 1500.
I can't say that I've noticed any degradation in Internet throughput. I consistently get 36 Mbps down and 24 Mbps up. :woot:
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
