NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
simonhang wrote: Finally found solution to wake-on-line & fan control problem on my Ultra6.
Fan control addon itself is fine on Ultra6. The problem is on the coretemp module. Netgear switch to dts reading mode for CPU temperature which is not stable at all. I switched using reading from it87 board sensors but these are not multipled by 1000 so fan control read as 0 degree all the time.
I just simply modified fancontrol script, when it's it87 board and read from hwmon1 temps, multiple 1000 as the special treat.
Simon
I personally have a Pro 6 and everything seems to be working okay, but for the benefit of the rest of the community, would you please post your fancontrol script (or any others for that matter) that have solved your various problems. You never know how your blood, sweat and tears may help others struggling with similar issues. . .
Thanks in advance!
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
