NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
Last night I tried to upgrade my Pro from 4.2.26 to 6.1.7 using the three step procedure.
The only difference was that I first did a factory default on 4.2.26, that worked then I used the modified package for the update. In Raidar I could see it was updating after that was completed, it now indicates 6.1.7 there.
However on the frontpanel on the Pro it still says "Booting... Disk added" and the WebGui doesn't work. I guess it's stuck in a boot procedure.
Any idea's :(
The only difference was that I first did a factory default on 4.2.26, that worked then I used the modified package for the update. In Raidar I could see it was updating after that was completed, it now indicates 6.1.7 there.
However on the frontpanel on the Pro it still says "Booting... Disk added" and the WebGui doesn't work. I guess it's stuck in a boot procedure.
Any idea's :(
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
