NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
Am still trying to get replicate to work. If I can not get replicate to work between the two platforms I think I will upgrade the RNP6.
After reading the forums I think I have to put in my last two 2 TB drives in the RNP6 one at a time and let them be incorporate into the volume and then if all is well install Prepto4to6 x86.bin then R4toR6_6.1.7.bin and reboot then do manual factory default. I expect it will take 2-3 days to reformat the 6 drives. I then will have to try Replicate from 516 to RNP6 or rebuild from backups.
Hope this makes sense. Any one with experience with this have any thoughts
bigbearf
After reading the forums I think I have to put in my last two 2 TB drives in the RNP6 one at a time and let them be incorporate into the volume and then if all is well install Prepto4to6 x86.bin then R4toR6_6.1.7.bin and reboot then do manual factory default. I expect it will take 2-3 days to reformat the 6 drives. I then will have to try Replicate from 516 to RNP6 or rebuild from backups.
Hope this makes sense. Any one with experience with this have any thoughts
bigbearf
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
