NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
Installed 6.1.9 RC on my Pro 6 :
1)The fan now no longer gives the constant too slow or stopped warning but it has a slightly annoying hunting noise as it keeps switching speed when the system is not loaded. Is there anyway to dampen the response or set it so the speed changes are more gradual and not such a step change? As can be seen in the graph the control is not stable when lightly loaded. Assuming the fan control is based on a PID controller does anyone know where I can increase the integral part?
2)Bonjour to osx is much improved.
3) LCD dimming seems to be broken.
1)The fan now no longer gives the constant too slow or stopped warning but it has a slightly annoying hunting noise as it keeps switching speed when the system is not loaded. Is there anyway to dampen the response or set it so the speed changes are more gradual and not such a step change? As can be seen in the graph the control is not stable when lightly loaded. Assuming the fan control is based on a PID controller does anyone know where I can increase the integral part?
2)Bonjour to osx is much improved.
3) LCD dimming seems to be broken.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
