NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!
Update: It is now unofficially possible using NTGR images to update legacy hardware to os6.X See Post #3, for directions to install 6.2.1 on x86 Ultra and Pro Models. (ARM NOT SUPPORTED by this OS) ...
mdgm and I have decided that its time to lock this thread. So please do post any new OS6 on Legacy issues on their own threads.
I updated both of my ReadyNAS Pros to 6.4. One seems to be running fine, but the other survived a couple reboots but some services like ReadyCLOUD didn't seem to be connecting. I did a full shut down, powered it back on and now it's just stuck saying "READYNAS" on the OLED display. The drives do not spin up, NIC doesn't seem to connect to router, OS doesn't load, just "READYNAS" on the display. I cannot access the boot menu with the drives in or with them out. I am at a loss.. Any suggestions?
Just upgraded my Pro 6 to 6.4 from 6.2.4 and now the fans shutdown after the system gets up and running. Temps on the inside of the case are in the 70C range which is bad (normal is 30C). My other ReadyNAS 316 is running just fine with 6.4. Unfortunately you CANNOT go backwards from 6.4 to previous releases of ver 6.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
