OS6 now works on x86 Legacy WARNING: NO NTGR SUPPORT!

Think I'll setup the line in etc/crontab
Thanks
/T

mdgm pointed out something that may help.. Can you check bios_ver.log in your System Logs? If you don't have a 2.0 BIOS revision (but the older 1.6), that could be part of the culprit for your LCD screen woes.

I made a BIOS Update add-on a few years ago, but it won't work on OS6. Maybe someone else can update it for OS6. viewtopic.php?p=387035#p387035

You can install flashrom via apt-get and extract the contents of the add-on and install the ROM manually but you would need to make sure to choose the correct ROM. Checking the existing BIOS version should confirm which ROM to need to use, but if you are still in doubt ask here.

Thanks chaps.

I have business pro 6. The current firmware is indeed 1.6. I have extracted the roms and loaded flashrom but just want to check RN_NV6_072610.ROM is the correct rom.

If I get the wrong file am I right in thinking it will brick it?

That is the correct ROM to use.

So i have been testing this new OS on my ultra 2 for a week now, and its working great except a few caveats:

*First it is not possible point shares to directories on the NAS, so no shares within shares or root shares possible. So if you want to be able to move files quick between shares you are stuck with one share, destroying the entire concept.

*The snapshot feature seem great at a glance but since you are stuck with one share and there is no way to limit the amount of space snapshots are allowed to use constant moving, deleting and changing of files will eventually eat up all your available storage space. And if you are using/changing large files this will happen sooner than later.

*The antivirus feature are tempting, but a simple test moving large quantity of files locks up the NAS pretty bad, so the performance impact is reducing this feature to unusable.

*the plex server is offered from start but is severely outdated so it wont work with the remote players (plex for windows 8 for example)

*Hard drive maintenance is not possible to schedule anymore, you have to manually press a button.

*The feature to back up a share to Dropbox seems great, but it can not be scheduled making it less useful, and Dropbox offer very limited space for free, compared to for example Gdrive, Skydrive or Box. Edit: Also can only be applied to a share, not a folder in a share. So if you only got one share that will most likely not fit.

*Backup jobs can be directed to specific folders within shares but the option is not presented to you easily, you will have to manually insert the path by editing the job after it has been created, the browsing option is not working (take care to sett it properly before making a sync job, deleted an entire 2tb disk by accident because of this).

*External usb discs sets root folder privileges every time they are connected, so if the device starts or you disconnect them you will have to change the folder privileges manually through ssh. If you for instance want a app to be able to write to them. Changes trough admin pages does not work.

*And lastly there is still no auto block list feature with connection log, something that has never been there and been sorely missed. So i guess the password boots have a good time with my NAS, and got all time they need to spam every possible password combination to get in to it.

If any of these complains is wrong or have solutions feel free to respond, i am not possessing great skills in the linux/nas department so it is possible some of these are user errors, but then again if that is true then the OS can be said to be lacking in usability.

alltet wrote:
*First it is not possible point shares to directories on the NAS, so no shares within shares or root shares possible. So if you want to be able to move files quick between shares you are stuck with one share, destroying the entire concept.

It would be nice if the 'admin' user could access a whole volume over CIFS for doing this like they could on 4.2.x

alltet wrote:
*The snapshot feature seem great at a glance but since you are stuck with one share and there is no way to limit the amount of space snapshots are allowed to use constant moving, deleting and changing of files will eventually eat up all your available storage space. And if you are using/changing large files this will happen sooner than later.

The setting for handling this is set by NetGear, I think.

alltet wrote:
*The antivirus feature are tempting, but a simple test moving large quantity of files locks up the NAS pretty bad, so the performance impact is reducing this feature to unusable.

If you have anti-virus software running on your PC that should be enough unless you download files direct to the NAS from untrustworthy sources and access those files from your PCs.

alltet wrote:
*the plex server is offered from start but is severely outdated so it wont work with the remote players (plex for windows 8 for example)

This should be updated in a future firmware update. For now you can update it via SSH.

alltet wrote:
*Hard drive maintenance is not possible to schedule anymore, you have to manually press a button.

Yes. Hopefully they will add the option to schedule some of these tasks in the future.

alltet wrote:
*Backup jobs can be directed to specific folders within shares but the option is not presented to you easily, you will have to manually inset the path by editing the job after it has been created, the browsing option is not working (take care to sett it properly before making a sync job, deleted an entire 2gb disk by accident because of this).

Yes you need to set the path correctly. No important data should be entrusted to a single device. If unsure as to what paths you should use experiment with test shares and/or ask for help here.

alltet wrote:
*And lastly there is still no auto block list feature whit connection log, something that has never been there and been sorely missed. So i guess the password boots have a good time with my NAS, and got all time they need to spam every possible password combination to get in to it.

It should be possible to edit the config via SSH. I haven't experimented with this though. A sqlite3 database might need editing too for the change to stick and survive a reboot.

mdgm wrote:
alltet wrote: *the plex server is offered from start but is severely outdated so it wont work with the remote players (plex for windows 8 for example) This should be updated in a future firmware update. For now you can update it via SSH.

Since i am lacking in ssh genuineness what are the exact command? That would really be helpful.

mdgm wrote:

alltet wrote: *Backup jobs can be directed to specific folders within shares but the option is not presented to you easily, you will have to manually inset the path by editing the job after it has been created, the browsing option is not working (take care to sett it properly before making a sync job, deleted an entire 2gb disk by accident because of this). Yes you need to set the path correctly. No important data should be entrusted to a single device. If unsure as to what paths you should use experiment with test shares and/or ask for help here.

Yes i noticed through trial and error, with the error part pronounced. Took me a few days of scanning the drive to find appropriate recovery software that was able to recover my ext3 partition and lost files.

mdgm wrote:

alltet wrote: *And lastly there is still no auto block list feature whit connection log, something that has never been there and been sorely missed. So i guess the password boots have a good time with my NAS, and got all time they need to spam every possible password combination to get in to it. It should be possible to edit the config via SSH. I haven't experimented with this though. A sqlite3 database might need editing too for the change to stick and survive a reboot.

Sounds great but also above my abilities unfortunately.

alltet wrote:
Since i am lacking in ssh genuineness what are the exact command? That would really be helpful.

Are you a PlexPass member?

mdgm wrote:
alltet wrote: Since i am lacking in ssh genuineness what are the exact command? That would really be helpful. Are you a PlexPass member?

no, i do not think so. That is a subscription is it not? I have payed for the windows software but i have no subscription.