NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Poor streaming connection/speed
ReadyNAS NV+ v2 WNDR4500 2 x Powerline AV500 Tvix N1 Network Player Hello. My first post at the ReadyNAS forum (previous Stora owner!). I hope someone can help me; I'm getting really frustra...
Hello,
a) This could be the problem then?... There is a total useable capacity of 5.4TB (4 x 2TB using X-RAID2), with 14% free (798.7 GB).
b) The SMART Attributes for disk 1; (The other three show almost identical figures)
Raw Read Error Rate; 0
Spin Up Time: 4275
Start Stop Count: 264
Realloacated Sector Count: 0
Seek Error Rate: 0
Power On Hours: 9397
Spin Retry Count: 0
Callibration Retry Count: 0
Power Cycle Count: 264
Power-Off Retract Count: 263
Load Cycle Count: 0
Temperature Celsius: 32
Reallocated Event Count: 0
Current Pending Sector: 0
Offline Uncorrectable: 0
UDMA CRC Error Count: 0
Multi Zone Error Rate: 0
ATA Error Rate: 0
The PC I'm using to test the NAS is a Windows 7 Professional 64-Bit PC with an i5-2500K running at 3.30 GHz with 8GB RAM.
It has gigabit network - 'Realtek PCIe GBE Family Controller' which Windows says is using up-to-date drivers. As far as I am aware, the 'Advanced properties' are all at their default settings, though there are some that I have wondered about changing to see if the NAS performance could be improved, but without 'expert' guidance I have resisted tempation!
Would any other information be useful?
Thanks.
a) This could be the problem then?... There is a total useable capacity of 5.4TB (4 x 2TB using X-RAID2), with 14% free (798.7 GB).
b) The SMART Attributes for disk 1; (The other three show almost identical figures)
Raw Read Error Rate; 0
Spin Up Time: 4275
Start Stop Count: 264
Realloacated Sector Count: 0
Seek Error Rate: 0
Power On Hours: 9397
Spin Retry Count: 0
Callibration Retry Count: 0
Power Cycle Count: 264
Power-Off Retract Count: 263
Load Cycle Count: 0
Temperature Celsius: 32
Reallocated Event Count: 0
Current Pending Sector: 0
Offline Uncorrectable: 0
UDMA CRC Error Count: 0
Multi Zone Error Rate: 0
ATA Error Rate: 0
The PC I'm using to test the NAS is a Windows 7 Professional 64-Bit PC with an i5-2500K running at 3.30 GHz with 8GB RAM.
It has gigabit network - 'Realtek PCIe GBE Family Controller' which Windows says is using up-to-date drivers. As far as I am aware, the 'Advanced properties' are all at their default settings, though there are some that I have wondered about changing to see if the NAS performance could be improved, but without 'expert' guidance I have resisted tempation!
Would any other information be useful?
Thanks.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
