NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
michelkenny
Sep 26, 2006Aspirant
Post your performance results
I thought it might be interesting to see what kind of performance everyone is getting with IO Meter so that we can compare what we're getting. So I thought we could all post our results in this thread for easy comparison.
You can run IO Meter by following the steps here: http://www.infrant.com/forum/viewtopic.php?t=265
Please post your hardware specs, other relevant info, and IO Meter results. Maybe this could get stickied? Or ignored if no one cares :)
-------
Here's my info:
Stock NV
4 x Seagate ST3250823AS 250gb Hard Disk in X-RAID
All journaling disabled
Fast writes on
Intel D805 2.66ghz dual core cpu
Intel D945GNTLKR motherboard with onboard Intel Gigabit NIC
2 gigs ram
Seagate ST3250824AS 250gb Hard Disk
Windows Vista x86 RC1 (if that makes a difference)
Dell PowerConnect 2708 Gigabit switch (no jumbo frames)
Cat 6 cabling
IO Meter Write: 19.321793 MBps
IO Meter Read: 26.803979 MBps
You can run IO Meter by following the steps here: http://www.infrant.com/forum/viewtopic.php?t=265
Please post your hardware specs, other relevant info, and IO Meter results. Maybe this could get stickied? Or ignored if no one cares :)
-------
Here's my info:
Stock NV
4 x Seagate ST3250823AS 250gb Hard Disk in X-RAID
All journaling disabled
Fast writes on
Intel D805 2.66ghz dual core cpu
Intel D945GNTLKR motherboard with onboard Intel Gigabit NIC
2 gigs ram
Seagate ST3250824AS 250gb Hard Disk
Windows Vista x86 RC1 (if that makes a difference)
Dell PowerConnect 2708 Gigabit switch (no jumbo frames)
Cat 6 cabling
IO Meter Write: 19.321793 MBps
IO Meter Read: 26.803979 MBps
308 Replies
Replies have been turned off for this discussion
- yoh-dahGuideGreat idea. You've been stickied 8)
- btvAspirantHi,
here are my results...
--------------- 1GB direct connection -----------------
- read 40 mb/s
- write 34 mb/s
--------------- 100MB router connection ----------------
- read 16 mb/s
- write 16 mb/s
--------------- 11MB wireless connection --------
- read 3 mb/s
- write 3-4 mb/s
Connection from laptop:
IBM thinkpad, Intel Pentium 1.8Ghrz, 1gb ram
wired: Broadcom NetXtreme Gigabit Ethernet
wireless: Intel(R) PRO/Wireless 2915ABG Network Connection
Router:
3COM OfficeConnect
Greetz
BtV
Ps. All utp cables are brand new
Ps. All utp cables are not lying besides electrical cables, this would also slow down speed a lot - bhoarAspirant
btv wrote: Hi,
here are my results...
--------------- 1GB direct connection -----------------
- read 40 mb/s
- write 34 mb/s
--------------- 100MB router connection ----------------
- read 16 mb/s
- write 16 mb/s
16MB/s over 100mbit ethernet? I think there's some caching behavior at work...
-brendan - zamboniAspirantReasyNAS NV with single 750GB drive. UPS, journaling off, cache on, etc.
Netgear 100mbit router/switch
PC: Nvidia motherboard/gigabit NIC, 1 GB RAM, Athlon
Read: 8.3 MB/sec
Write: 9.5 MB/sec - patjaAspirantI am seeing some pretty strong results...makes me wonder if I missed something in the Iometer setup instructions, but I've triple checked them. I've done 6 runs now and see:
Writes: 35 or 56 MBps (half the time it is 35, half 56)
Reads: 33, 47, and 72 MBps (of my 6 runs I've got two at each of these)
Everything on the ReadyNAS is setup per the instructions on the forum. I am only sharing as CIFS. No SMB and no HTTP.
The network switch is a SMCGS8
My PC is an ASUS A8N-E, Athlon X2 3800+, 2 GB RAM, onboard gig ethernet (Nvidia)
Do you guys see consistent results from one run to the next? - michelkennyAspirantYes my results are always pretty much the same for multiple runs. In the thread where it explains how to use IO Meter, I think there's a file that you can download that has all the right settings for a test. All you have to do is pick the drive you have mapped.
- yoh-dahGuide
patja wrote: I am seeing some pretty strong results...makes me wonder if I missed something in the Iometer setup instructions, but I've triple checked them. I've done 6 runs now and see:
Writes: 35 or 56 MBps (half the time it is 35, half 56)
Reads: 33, 47, and 72 MBps (of my 6 runs I've got two at each of these)
Everything on the ReadyNAS is setup per the instructions on the forum. I am only sharing as CIFS. No SMB and no HTTP.
The network switch is a SMCGS8
My PC is an ASUS A8N-E, Athlon X2 3800+, 2 GB RAM, onboard gig ethernet (Nvidia)
Do you guys see consistent results from one run to the next?
As much as I'd like to want to believe the ReadyNAS is that fast, I think it might have to do more with caching on the PC side as you have 2GB of memory. If you use a larger test data size with IOMeter, you'll probably get a more consistent result. - patjaAspirant
As much as I'd like to want to believe the ReadyNAS is that fast, I think it might have to do more with caching on the PC side as you have 2GB of memory. If you use a larger test data size with IOMeter, you'll probably get a more consistent result.
That makes sense. I increased the maximum disk size to 4096000 and am now getting reads of 47 MBps and writes of 42 MBps pretty consistently. - yoh-dahGuide
patja wrote: As much as I'd like to want to believe the ReadyNAS is that fast, I think it might have to do more with caching on the PC side as you have 2GB of memory. If you use a larger test data size with IOMeter, you'll probably get a more consistent result.
That makes sense. I increased the maximum disk size to 4096000 and am now getting reads of 47 MBps and writes of 42 MBps pretty consistently.
I believe that's sector count, so you may even want to double that size. - patjaAspirant
yoh-dah wrote: patja wrote: As much as I'd like to want to believe the ReadyNAS is that fast, I think it might have to do more with caching on the PC side as you have 2GB of memory. If you use a larger test data size with IOMeter, you'll probably get a more consistent result.
That makes sense. I increased the maximum disk size to 4096000 and am now getting reads of 47 MBps and writes of 42 MBps pretty consistently.
I believe that's sector count, so you may even want to double that size.
I doubled it to 8192000 and am seeing writes at 53 - 55 and reads consistently at 47. I am using the iometer.icf file posted on the Iometer thread, just changing the target to my mapped drive and increasing the max disk size sectors.
Related Content
NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!