NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Pro 6 upgrade to 6.4.1
FWIW I updated from 6.2.4 to 6.4.1 and had a few minor issues: 1. wordpress was no longer working. I hadn't used it much so I uninstalled for now, but if I had been a big wordpress user I might h...
CPU is 1622 and system fan is 907. CPU is 37c and system is 64c. This is no change for me. I think the cpu cooler is overdue for a cleaning. The system temp has always been high even though I can't feel it anywhere near that hot at any point inside or out. So far so good.
steve
Hi dsm1212,
Thanks for the feedback. Have you reinstalled the WordPress add-on? Get a fresh copy here.
Kind regards,
BrianL
NETGEAR Community Team
I upgraded my Pro6 from 6.4.0 to 6.4.1 and DVBLink TV Server stopped recognising the tuner. No doubt DVBlogic will update their driver in a new build, but just a word of caution for any others before upgrading.
This morning I found the system was hung. No access to anything including ssh. Log shows it was a GPF. The crash happened 10 minutes after a quarterly drive rebalance job I had scheduled. I power cycled and it came back up.
steve
Dec 03 04:25:31 warehouse6 kernel: general protection fault: 0000 [#1] SMP
Dec 03 04:25:31 warehouse6 kernel: Modules linked in: nv6lcd(O) vpd(PO)
Dec 03 04:25:31 warehouse6 kernel: CPU: 1 PID: 14484 Comm: sleep Tainted: P O 4.1.13.x86_64.1 #1
Dec 03 04:25:31 warehouse6 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M., BIOS 080014 07/26/2010
Dec 03 04:25:31 warehouse6 kernel: task: ffff88024686a010 ti: ffff8801cc78c000 task.ti: ffff8801cc78c000
Dec 03 04:25:31 warehouse6 kernel: RIP: 0010:[<ffffffff8811f337>] [<ffffffff8811f337>] filp_close+0x17/0x80
Dec 03 04:25:31 warehouse6 kernel: RSP: 0018:ffff8801cc78fef8 EFLAGS: 00010282
Dec 03 04:25:31 warehouse6 kernel: RAX: ffff8801091c8940 RBX: 8f5c21baea331f00 RCX: ffff88002c0cf000
Dec 03 04:25:31 warehouse6 kernel: RDX: 0000000000000001 RSI: ffff880246f7a5c0 RDI: 8f5c21baea331f00
Dec 03 04:25:31 warehouse6 kernel: RBP: ffff8801cc78ff18 R08: 00007fbe2e7727a0 R09: 00007fbe2e98c700
Dec 03 04:25:31 warehouse6 kernel: R10: 00007fffc6c08620 R11: 0000000000000246 R12: 0000000000000001
Dec 03 04:25:31 warehouse6 kernel: R13: 00007fbe2e771c60 R14: 0000000000000000 R15: 0000000000000000
Dec 03 04:25:31 warehouse6 kernel: FS: 00007fbe2e98c700(0000) GS:ffff88024fc80000(0000) knlGS:0000000000000000
Dec 03 04:25:31 warehouse6 kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
Dec 03 04:25:31 warehouse6 kernel: CR2: 00007fbe2e43fd20 CR3: 0000000173f0b000 CR4: 00000000000406e0
Dec 03 04:25:31 warehouse6 kernel: Stack:
Dec 03 04:25:31 warehouse6 kernel: ffff8801cc78ff58 ffff880246f7a5c0 0000000000000001 00007fbe2e771c60
Dec 03 04:25:31 warehouse6 kernel: ffff8801cc78ff38 ffffffff8813d9ef 00007fbe2e7712a0 0000000000000000
Dec 03 04:25:31 warehouse6 kernel: ffff8801cc78ff48 ffffffff8811f2ee 0000000000000000 ffffffff889b2017
Dec 03 04:25:31 warehouse6 kernel: Call Trace:
Dec 03 04:25:31 warehouse6 kernel: [<ffffffff8813d9ef>] __close_fd+0x6f/0x90
Dec 03 04:25:31 warehouse6 kernel: [<ffffffff8811f2ee>] SyS_close+0x1e/0x50
Dec 03 04:25:31 warehouse6 kernel: [<ffffffff889b2017>] system_call_fastpath+0x12/0x6aSince upgrading to 6.4.1 my nas seems to lose all connectivity every couple of days. Only way out is to hard reboot. After the last reboot a couple of days ago, I noticed that it has started balancing - and again lost all connectivity (no web admin, no ssh, no ping reply etc). The balancing is also taking quite some time (it is at 12% after about 24 hours). There is about 800Gb free on a Raid 5 set up (5 x 2Tb on ReadyNAS PRo), so hopefully sufficient free space for the balancing.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
