NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Raidar finds Netgear storage but says it is not accessible
Correct wording is Your NETGEAR Storage is not accessible from this computer, please check your network setting.
Interestingly I was able to access it from this mac yesterday and increase my timemachine GB storage. However today I cannot access it via Raidar or even by typing in directly the 10.0.*.* address. Yet the mac beside this one can access it straight away read files and enter the admin page. All drives are healthy and I still have 1.8TB or 5.56 TB remaining. Any ideas?
Hi all. Not replacing drives. Mac computers only. Re set and re booted NAS then reset Google as their double secure system didnt help. All working now with new updates.
Thanks for all your help.
18 Replies
Replies have been turned off for this discussion
How are the macs connected to the nas, same switch/router?
How do your LAN clients get IP addresses?
Can you access the other Mac from the problematic one?
Have you checked the Network settings of the problematic Mac, and that the subnet is the same as the nas and other Mac?
Have you rebooted everything?
Both macs are connected by wifi to the nighthawk which the Nas Drive is attached too. Both macs can see NAs via Raidar.
Both macs used to access via Admin log in at the set IP address. Problematic Mac now can't as of today. Other one no problem. Can type IP address striaght in and away it goes.
We dont link macs So cannot access other Mac from Problemac one.
Subnet and routers are the same on all three devices.
Have rebooted NASdrive and Problematic Mac
Which firmware version is on this 104?
Are you running the same version of Mac OS X on each Mac? Are you using the same web browser?
Hi,
Today installed new hard drive is ReadyNas Duo (v1).
Next want make factory reset (to format disk etc).
RAIDar see Duo, but when I click on Setup to choose raid etc got error "Your NETGEAR Storage is not accessible from this computer, please check your newtwork setting.
PC or Mac?
What version of RAIDar?
Can you ping the duo?
Mac, Raidar 6.0
Today I try make factory reset and now RAIDar see Duo on 192.168.1.50 (same network as I am). Now I can access setup to choose raid level.
Propobly problem is only there if I install new hard drive. When I installed new drive yesterday, setup goes automatycly after few minutes with xraid.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
