NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

slinkydonkey's avatar
slinkydonkey
Aspirant
Jan 01, 2016
Solved

READNAS Duo V1

So I moved house about a year ago since then I have reformated the disks (i think) its been a long time.

Anyway the problem is I have spent all New Years day try to get this little machine working :(

 

Initally I could see it was getting an IP address of 192.168.168.168

Not that matter becuae I couldn't connect to it's admin page anyway.

 

Somehow I manged the device changed its IP address to 192.168.1.106

 

Even then I stilll couldn't connect to the admin page.

 

I have tried to do a completly factory re-set ..by turning off device putting a paper clip in the rear and powering on the unit..

Now that happends is that the blue powerlight is blinking at me and the 2nd hard drive light is on what the hell does that mean??

 

Can anyone help im going nuts here :(

Also RAIDar knowlonger can find the device.. 

  • StephenB's avatar
    StephenB
    Jan 02, 2016

    slinkydonkey wrote:
     The status says currupted ...how do I uncurrupted? 

     


    I am thinking you mean "corrupted root".

     

    If you don't have any data on the NAS that you need to extract, the simplest thing is to start with a fresh factory install.

     

    You can do that using the factory reset procedure in the hardware manual ( http://www.readynas.com/download/documentation/HM/Duov1_NV%2Bv1_HW_en_06Dec11.pdf page 15).

     

    Another way (which avoids the paper clip steps) is to unformat both disk drives.  If you can connect the to a windows system, you can zero the drives with the vendor diags (lifeguard for western digital, seatools for seagate).  Or right-click on "computer" and select "manage".  Scroll down to the disk manager section, right-click each "volume" on the your NAS drives and delete it.  Then reinsert the drives into the NAS and power up.

     

    Also note that the max disk size for the duo v1 is 2 TB.

5 Replies

Replies have been turned off for this discussion
  • StephenB's avatar
    StephenB
    Guru - Experienced User

    I'd start by testing the disks in a PC with the vendor diags (Lifeguard for Western Digital, or Seatool for Seagate).

      • slinkydonkey's avatar
        slinkydonkey
        Aspirant

        Ok so this morning it has rebooted and I can see it in RAIDer

         

        Its got an IP address off 192.168.1.106 which I can pring but  still admin page won't work :(

        The two hard drives are showing with two green ticks.

         

        The status says currupted ...how do I uncurrupted? 

         

        Power light is flickering and all the green flights are flickering at the same rate as each other?

         

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More