NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Ready Nas Adding a new disk
Hi. I purchased a Readny NAS 104 and added 3 X 2TB Hard disks to Slot 1-3. Works Fine. Today, I bought a 4TB WD Red HDD and added to the 4th slot. The LED on display for 4th slot is ON. ...
SOLVED:
TO UPDATE, I checked the Hard Disk. It was all good.
I left the device, and It found the Hard Disk after 24 Hours!
Now works fine.
Thanks Stephen for your comments.
Perhaps try rebooting the NAS.
Tried 3 Times :(
The next step is to test the new drive. The best way is to connect the drive to a windows PC (either SATA or via a usb/sata adapter) and run Western Digital's lifeguard program.
Also, if you have a scratch disk available, you could insert it into slot 4 and see if it is recognized.
SOLVED:
TO UPDATE, I checked the Hard Disk. It was all good.
I left the device, and It found the Hard Disk after 24 Hours!
Now works fine.
Thanks Stephen for your comments.
Hi ImanAlimi,
If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution.
The Netgear community looks forward to hearing from you and being a helpful resource in the future!
Regards,
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
