NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Ready NAS Duo V2 - No Disks Detected after Firmware Upgrade
I recently carried out a firmware update on my Ready NAS Duo V2 (RND2000). I then went away for Christmas, and have not been able to read the disk since. I am only using a single disk as I am just...
(a) are you sure you have a v2? The labeling is confusing... Check out this guide: http://www.rnasguide.com/2012/01/09/how ... -or-nv-v2/
(b) There is no 10-second option after reboot. I think you are confusing the boot-menu instructions (when you are holding down buttons during boot up) with the normal boot up.
It is possible that your disk simply failed. The next step is to power down the NAS, and run the vendor's disk diags on a PC (seatools for seagate, lifeguard for western digital).
(b) There is no 10-second option after reboot. I think you are confusing the boot-menu instructions (when you are holding down buttons during boot up) with the normal boot up.
It is possible that your disk simply failed. The next step is to power down the NAS, and run the vendor's disk diags on a PC (seatools for seagate, lifeguard for western digital).
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
