Forum Discussion

Aspirant

Jun 11, 2017

ReadyNas - RAIDiator 4.1.16 - Win10 issues

Hi, I´ve got a ReadyNas Duo running with the latest firmware RAIDiator 4.16.16. Haven´t have any problem, until yesterday. I´m unable to access the NAS on WiFi through Win10 browsing \\NAS och ...

File Sharing

mdgm-ntgr

NETGEAR Employee Retired

Jun 11, 2017

The NV+ (v1) only supports SMB1. It's the default and only version of SMB supported.

MrMarc

Aspirant

Jun 11, 2017

Thanks

So what should i do then if this doenst work? I can ping the nas without any problems. Probably this started with som windows patch last week

StephenB
Guru - Experienced User
Jun 11, 2017
What happens if you open CMD on the windows system and enter

net use * /delete

net use t: \\nas-ip-address\c /user:admin nas-admin-password

Be careful on the slash direction and spaces (and use the real ip address and admin password of course).

This normally will mount the C data volume as driver letter T.
- MrMarc
  Aspirant
  Jun 11, 2017
  "
  StephenB wrote:
  What happens if you open CMD on the windows system and enter
  net use * /delete
  net use t: \\nas-ip-address\c /user:admin nas-admin-password
  
  Be careful on the slash direction and spaces (and use the real ip address and admin password of course).
  
  This normally will mount the C data volume as driver letter T.
  
  The Network name cannot be found"
  - StephenB
    Guru - Experienced User
    Jun 11, 2017
    Can you ping the NAS ip address from the PC?
mdgm-ntgr
NETGEAR Employee Retired
Jun 11, 2017
Have you tried rebooting your NAS and PC?

Can you access the web admin interface?
- MrMarc
  Aspirant
  Jun 11, 2017
  mdgm wrote:
  Have you tried rebooting your NAS and PC?
  
  Can you access the web admin interface?
  
  I´ve tried rebooting both, twice.
  
  Yes, can access the interface without any problems