NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS 104 DLNA Service Not Working.
I have a couple of ReadyNAS 104 that I am re-purposing, I have completely restored to default and then created a share on both boxes and enabled DLNA service, but I cannot see the two storage options...
So it seems that the NAS is not finding any of your media. Something to try is to load just a few pictures or audio files initially, if you have a 'media' share by default use that. Then rescan from the UI and again check the status.
You enabled both the service (system->settings) and enabled DLNA for the shares themselves?
Under Shares I have allowed 'Anonymous and Any Host'
And under Network Access I have enabled DLNA and set to All for media type.
James
Did you try rescanning? (system->services)
Yes, many times, I have even switched the unit off and restarted it many times, but still not allowing it to be seen on the network from any of the TV's.
Not sure if it helps but I can install a DLNA server on the PC and tell it that all the storage is on the RAID and it plays fine then to any of the TV's, but this is the TV's seeing the software, not the TV's seeing the DLNA Server of the ReadyNAS.
James
jamessawle2 wrote:
Not sure if it helps but I can install a DLNA server on the PC and tell it that all the storage is on the RAID and it plays fine then to any of the TV's, but this is the TV's seeing the software, not the TV's seeing the DLNA Server of the ReadyNAS.
FWIW I have Plex running on a PC in similar fashion (which gives me real-time transcoding).
You could try enabling plex (and disabling ReadyDLNA) on the RN104, just to see if the TVs pick that up. Also, you can check to see if the PCs see the RN104's DLNA server (it usually shows up under Media Devices)
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
