NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Readynas 104 FlexRaid 6 File recovery
Hi,
I have a readynas 104 set up with Flexraid 6 and the recycle bin feature is turned off etc. I recently accidentally deleted some files and really need to recover them. Things looked a lot e...
Did you have snapshots enabled on the shares? If so, you can reinsert the disks in the NAS and recover old files from web admin ui.
I don't know of any free windows software that will do what you want. You could try ReclaiMe - trying it is free, but recovering files is not. https://www.reclaime.com/
You could also try booting up the PC with a linux live disk, and installing mdadm and btrfs.
Hi, Thanks for the reply. No snapshots are not enabled (otherwise I would have just recovered using this feature). I tried reclaime but couldnt get it to install, but to be honest i am surprised that is the only windows based software out there.
Regarding the linux method, is there a step by step guide with commands? I'm willing to try it but don't have a huge amount of Linux experience hence the guide would really help. Just to be clear, would the linux method allow me to scan for deleted files and check what they are before recovering (using a GUI) ? Listing the deleted files via command line would be a pain as i suspect there will be a lot, plus I'm not 100% sure if the files I'm looking for were actually on the NAS (long story)
Brenning wrote:
I tried reclaime but couldnt get it to install, but to be honest i am surprised that is the only windows based software out there.
There isn't a lot of Windows software that works with ext either.
What version of windows are you using? I haven't seen any posts on ReclaiMe install issues here before.
Brenning wrote:
No snapshots are not enabled (otherwise I would have just recovered using this feature).
I thought so, but thought I'd confirm (since there is no recycle bin feature on OS-6 NAS unless you add that with ssh).
Brenning wrote:
Regarding the linux method, is there a step by step guide with commands? I'm willing to try it but don't have a huge amount of Linux experience hence the guide would really help. Just to be clear, would the linux method allow me to scan for deleted files and check what they are before recovering (using a GUI) ? Listing the deleted files via command line would be a pain as i suspect there will be a lot, plus I'm not 100% sure if the files I'm looking for were actually on the NAS (long story)
It would require using the command line interface, and it isn't easy. If you are prepared to pay for ReclaiMe, then perhaps consider using Netgear's data recovery service ( https://kb.netgear.com/69/ReadyNAS-Data-Recovery-Diagnostics-Scope-of-Service ).
Thanks for the replies so far. I now have the raid volume mounted in Linux and can see all of the current data. I have a spare 8TB drive and would like to restore any deleted files to this. Is there a command i can run to just restore anything thats been deleted to this other drive without copying the current data?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
