NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS 314 Inaccessible from domain controllers
My ReadyNAS had been working great up until about a week after I updated to 6.5.1. Then one day I was unable to access my home share, in the logs I was getting some errors about domain membership. ...
Well I figured out my issue. For some reason my DNS servers for eth0 were also set on eth1, which would then create a route for them using eth1, which is using a different network than my main one. The DNS servers are also my domain controllers, so this meant no access on the domain controllers at all. Just a bit of stupidity on my part, but I also got around to finally vlan-ing that switch like I had been intending to do, so I guess all is not lost. Thanks for your help.
Can you send in your logs (see the Sending Logs link in my sig)?
Logs sent. I actually notice it is saying failure to sync ADS now, I guess I didn't look before I made this post.
The logs suggesting checking the network and the interfaces show a lot of dropped packets.
You should start by eliminating possible network issues. You could try changing ethernet cables, using a different port on the switch etc.
I think I may have a misconfiguration somewhere in the network settings for the second adapter. I am using the second adapter only to connect to my vCenter server, which I am using as a secondary datastore. Disconnecting this adapter has allowed AD to start syncing again, which I thought wouldn't matter. I am going to have to play around with the settings some and see what I missed. I am also still getting dropped packets, though I will have to check after some time to see if it is less or not.
How did you go?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
