NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS 314 No volumes exist
Hello, I have a ReadyNAS 314 with firmware version 6.10.8. Suddenly I was not able anymore to access the data stored in the NAS. When logging in via web interface to the control panel of the NA...
Hi StephenB,
thank you for your answer.
Following the advice of a friend that works in IT, I logged in via SSH and then executed these two commands:
mdadm --assemble --really-force /dev/md127 /dev/sd[abcd]3 mount /dev/md127 /dataBy doing so I was then able to see my data again, but one disk was still marked red as in the screenshot below.
I then proceeded to format that disk and now the NAS is resynching.
So it seems that the problem is solved.
Thank you anyway for your availability.
Alira wrote:
I can no longer access my stored data at all - in the past, when I logged in as admin, I used to see my route directory and all stored data.
It sounds like you were logging in via ReadyCloud - which is now shut down.
Try accessing the NAS web admin interface directly by browsing to https://nas-ip-address/admin (using the real NAS IP address). You will get a security warning in the browser that you will need to click through.
There are a couple of ways to find the IP address if you do not know it.
- it is displayed on the LCD panel interface of the RN314
- you can find it in your router's attached device list
- If you have RAIDar installed, it can find the NAS
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
