NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

MarvS's avatar
MarvS
Aspirant
Nov 30, 2025

ReadyNAS Duo v1 unable to access

I own an older ReadyNAS duo (v1 based upon it NOT saying v2 on the front access door).  It was running fine until recently and here's what the current power up/boot sequence looks like

 

  1. Power on
  2. Start RAIDar and click on rescan while the NAS is booting up
  3. NAS power on light  and drive 1 flashing, drive 2 solid grren
  4. RAIDAR report System Staus
    1. IP address 192.168.xxx.xxx (actual numbers omitted but it does show a valid IP address issued via DHCP from my router)
    2. no firmware version is displayed
  5. Unable to connect to admin page.  Browser returns (Unable to connect/establish a connection to the server at 192.168.xxx.xxx.
  6. RAIDar reports Checking file system and then Quota Check (power activity and drive 1 LED's blinking drive 2 soli green. RAIDar shows both drives with green checkmarks.
  7. after a few moments the RAIDar display clears and issues a "RAIDar could not find any NETGEAR storage on your network. Check that your storage device is powered on and connected correctly. For more help, visit http://my.netgear.com"
  8. Rescan yields the same result in step 7.

The NAS was setup as a RAID volume using approved (at the time WD RED NASware 1.0TB drives)

1 Reply

  • StephenB's avatar
    StephenB
    Guru - Experienced User
    MarvS wrote:

    The NAS was setup as a RAID volume using approved (at the time WD RED NASware 1.0TB drives)

    I'd start by powering down the NAS and testing the drives in a Windows PC - connecting with either SATA or a USB adapter/dock.  You can use WD's test tool for this:

    Make sure you label the drives as you remove them, as they are formatted somewhat differently.

     

    You can also try powering up the NAS with only disk 2 installed (slot 2 empty) and see if that makes a difference.

     

    MarvS wrote:

    192.168.xxx.xxx

    FYI - It is safe to use the actual numbers, as these are private addresses that cannot be routed over the internet.

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More