NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNas Duo V1 USB Boot
We recently had to break the RIAD X mirror and thanks to the forum managed to recover the data by connecting the hard drives directly to the PC.
I tried to reset the NAS to Factory Default but Raidar says the boot is corrupt.
I tried to boot using a 16GB USB and following the USB boot instructions on the forum but not successful.
Guys any ideas on how I can get this thing working again?
I tried to reset the NAS to Factory Default but Raidar says the boot is corrupt.
I tried to boot using a 16GB USB and following the USB boot instructions on the forum but not successful.
Guys any ideas on how I can get this thing working again?
6 Replies
Replies have been turned off for this discussion
- delete the partitions on the drives, put them back in the NAS and power it up.
StephenB wrote: delete the partitions on the drives, put them back in the NAS and power it up.
Tried that, even formatted the hard drive before putting it in.- Wiped the partition table off the disk and rebooted the NAS. Hopefully this has fixed it.
mdgm wrote: Wiped the partition table off the disk and rebooted the NAS. Hopefully this has fixed it.
It says corrupt boot :(- Please check again.
Please also note that your disk has two ATA errors and may be failing. If you still have the same error try another disk. - Thanks for your help, still same error.
Will try a different disk.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
