NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS LED patterns
http://www.readynas.com/forum/faq.php#What_does_this_light_pattern_mean%3F_%28LED%29 Check our FAQ, HCL and more
- Until I post the FAQ, here is the info for reference:
LED blink behavior for 2 disk systems is three quick blinks of all disk LEDs and the backup LED, followed by an 1s delay, followed by a number of slow blinks. The number of slow blinks will be the error code.
Current error codes:
1 - Vendor mismatch
2 - No disks detected
3 - Bad contents on root partition of disks
4 - Flash error
5 - Unsupported RAID configuration
In case anyone else looks at this post, the error I described with all four LED's alternating with the 1&3 LED's indicates that "writing failed" to the flash. This warning can be seen in RAIDar, and was referenced in this previous post:
http://www.readynas.com/forum/viewtopic.php?f=20&t=21602&p=223143
http://www.readynas.com/forum/viewtopic.php?f=20&t=21602&p=223143
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
