NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS LED patterns
http://www.readynas.com/forum/faq.php#What_does_this_light_pattern_mean%3F_%28LED%29 Check our FAQ, HCL and more
- Until I post the FAQ, here is the info for reference:
LED blink behavior for 2 disk systems is three quick blinks of all disk LEDs and the backup LED, followed by an 1s delay, followed by a number of slow blinks. The number of slow blinks will be the error code.
Current error codes:
1 - Vendor mismatch
2 - No disks detected
3 - Bad contents on root partition of disks
4 - Flash error
5 - Unsupported RAID configuration
Hey all. I have a old ReadyNas 600. The power button doesn't seem to be working. It fires up when I hit the power button on the PSU and then does a alternating flash between 1/2 and 3/4. The power light doesn't light up. A buddy and I were going through the light codes and have tried all the advise we have found. Tried doing a firware upgrade, installed a video card so we could see if we could get a local view, and swapped out the ram with multiple sticks. Still does the same thing.
We think I need to get a new board for it. This happens with 2- 2TB drives in it or out of it.
Any advise would be greatful?
We think I need to get a new board for it. This happens with 2- 2TB drives in it or out of it.
Any advise would be greatful?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
