NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS NV+ (SPARC) Kernel Panic with Factory Settings
Good evening all, History and setup: I've had my NV+ for three or four years, in that time it have been kitted out with 2x Seagate 2TB hard drives and 2x Western Digital 2TB hard drives, the four ...
After your factory default you say the unit starts a resync. You say it is resyncing to disk 4, what do you mean?
If you factory default with 4 disks in and the volume starts to resync, all disks are involved and you should not receive messages about specific disks.
Are you saying the initial resync happens normally but then the nas wants to resync with disk 4 again? If this is the case it may be that disk 4 is dropping out of the array for some reason, perhaps a bad slot/sata connector.
I would still run full tests on all the disks first.
If you factory default with 4 disks in and the volume starts to resync, all disks are involved and you should not receive messages about specific disks.
Are you saying the initial resync happens normally but then the nas wants to resync with disk 4 again? If this is the case it may be that disk 4 is dropping out of the array for some reason, perhaps a bad slot/sata connector.
I would still run full tests on all the disks first.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
