NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Pro 6 with 6.4 reporting a status of "Dead"
As the subject says, since putting 6.4 on, the system status is "Dead." Oddly enough, everything seems to be fine except the case fan is not running very much. Temps seem fine so that might be a fe...
Thanks for the info, this fixed the issue. I opened up my ReadyNAS Pro 6 and moved the System FAN connector to the unused slot, and the FAN doesn't stop anymore (and I no longer get FAN warnings/errors).
In Step 2 on the page below you can see the slot circled in.
Probably not a hardware issue. If you restart your device you will most likely see the fan turn on. That is what I'm seeing anyhow.
I had the same issue. I opened up my Pro 6 (Business) and move the system fan from the header it was on to the one that was open on the same controller board. I think the open one is call #3. Either way this is the solution that was proposed for those with CPU fan issues.
Running 6.4.1 on Pro 6.
Thanks for the info, this fixed the issue. I opened up my ReadyNAS Pro 6 and moved the System FAN connector to the unused slot, and the FAN doesn't stop anymore (and I no longer get FAN warnings/errors).
In Step 2 on the page below you can see the slot circled in.
I am having the sam fan issue, I guess mine started after the 6.4 upgrade.
I don't think it's hardware since on reboot it spins fine...
I moved it to the 2nd fan header, we will see what happens.
David
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
