NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
ReadyNAS Pro Pioneer Edition and disk 4Tb
Hello all!
I need your help. I've use ReadyNAS Pro Pioneer Edition with 4 disks and with no RAID (stand alone volumes): 500Gb, 2*2Tb, 4Tb. So, I want to add another 4Tb disk. But no luck. NAS has seeing new disk. There's note in log: "New disk detected. If multiple disks have been added, they will be processed one at a time. Please do not remove any added disk(s) during this time. [Disk 5]". But there's no possibility to add new volume (no new disk tab). What's wrong? Any ideas?
P.S. New disk is from hardware compatibilities list and the same model already has been added some time ago.
NAS: Netgear Ready NAS Pro (6 slots), firware 4.2.31
Dane2000 wrote:
Problem has no solution if I'll use 4.2.x systems?I think not. Though one practical possibility is for you to back up your 500GB volume, and remove it. Then you should be able to add a new bigger volume (re-creating the shares on the original volume and restoring the files from your backup).
Dane2000 wrote:
In additional: in this case, I'll must to search, how to backup all my huge data?
You should have your data backed up anyway. RAID isn't enough to keep your data safe - and you don't even have RAID redundancy.
USB backup drives are a cost effective way (though I prefer backing up to other NAS myself). You can connect them to the Pro directly, though you will find it's faster to back up over gigabit ethernet (connecting the USB drive to a PC). There are several windows utilities that can handle this automatically (on schedule) - including FreeFileSync.
If you prefer to connect the drive to the NAS, you can set up incremental backups using rsync from the NAS backup job menus. The trick here is to pretend the source is remote (using 127.0.0.1 for it's IP address).
Dane2000 wrote:
Shall I changed system to OS6? Will it solve my problem?
The OS-6 software manual says it will (see page 24). http://www.downloads.netgear.com/files/GDC/READYNAS-100/READYNAS_OS_6_SM_EN.pdf
Though I haven't tried it (I use XRAID on my 6-bay NAS).
FWIW, if you do convert to OS-6 I suggest upgrading the memory in the Pioneer. Newer ReadyNAS have at least 2 GB of RAM, the Pioneer shipped with only 1 GB.
6 Replies
Replies have been turned off for this discussion
The problem is that 4.2.x systems are limited to 4 volumes (which you already have).
Apart from that, you'd need to be looking for the add volume tab, not add disk.
Thanks for your reply.
Remark: of course, I'd looking for "add volume" tab (sorry, english is not my native language) :0)
Problem has no solution if I'll use 4.2.x systems? Shall I changed system to OS6? Will it solved my problem? In additional: in this case, I'll must to search, how to backup all my huge data?
Dane2000 wrote:
Problem has no solution if I'll use 4.2.x systems?I think not. Though one practical possibility is for you to back up your 500GB volume, and remove it. Then you should be able to add a new bigger volume (re-creating the shares on the original volume and restoring the files from your backup).
Dane2000 wrote:
In additional: in this case, I'll must to search, how to backup all my huge data?
You should have your data backed up anyway. RAID isn't enough to keep your data safe - and you don't even have RAID redundancy.
USB backup drives are a cost effective way (though I prefer backing up to other NAS myself). You can connect them to the Pro directly, though you will find it's faster to back up over gigabit ethernet (connecting the USB drive to a PC). There are several windows utilities that can handle this automatically (on schedule) - including FreeFileSync.
If you prefer to connect the drive to the NAS, you can set up incremental backups using rsync from the NAS backup job menus. The trick here is to pretend the source is remote (using 127.0.0.1 for it's IP address).
Dane2000 wrote:
Shall I changed system to OS6? Will it solve my problem?
The OS-6 software manual says it will (see page 24). http://www.downloads.netgear.com/files/GDC/READYNAS-100/READYNAS_OS_6_SM_EN.pdf
Though I haven't tried it (I use XRAID on my 6-bay NAS).
FWIW, if you do convert to OS-6 I suggest upgrading the memory in the Pioneer. Newer ReadyNAS have at least 2 GB of RAM, the Pioneer shipped with only 1 GB.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
