NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS RND4000 NIC failure can I recover data
I have an old RND4000 with 4 drives in it (3 RND4000's actually). The PS died on one of them and the NIC died on another. I moved the PS to teh one with the good NIC, so I have 1 fixed OK, but now ...
There is a way, with Netgear's help, to mount the drives in a new model NAS and recover the data. But you can't just leave it that way and use it. You have to copy the data to another device, reset the NAS to factory default, and then restore the data. If I followed your story right, you still have one NV+ that works, so it would be a lot easier to put the drives in that NAS and do recovery that way. If you are using new drives in the new NAS, then backup jobs on the new NAS from the old would work well for that. If you are copying to an intermediary USB device, connect it to a computer that's on hardwired LAN and copy that way, as the NV/Duo V1 line have notoriously slow USB ports.
Yes I though of putting the drives in the other "working" NV+ b ut my main concern is: if that one is currently set to RAID5 and the other drives were XRAID will they be detected and properly read in the working NV+?
Or do I risk corrupting those drives completly because the NV+ will try to mount the drives incorrectly?
There is no risk moving the drives between units of the same type, done with power off, of course, because everything is stored on the drives. There is absolutely nothing regarding your configuration in flash memory. All that is there are a very small boot section, a copy of an un-initialized OS from which it can create or restore one on the drives, and the model number and serial number data.
Sandshark wrote:
There is no risk moving the drives between units of the same type,
One caveat is that there can be issues if the target unit has much older firmware in it's flash, as the NV+ will then attempt to downgrade the OS on the disks - which could fail if the firmware is very old.
Levisvv's systems are likely to be running the same firmware, though this could come into play if he purchases a used model as a replacement.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
