NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNas RNDP6350 won't boot
Hi all, new here and already with a big problem. Have a Readynas RNDP6350 which is not booting anymore, No OS, No Recovery, No anything! Seems the internal USB disk was wiped :? Hope ppl here have a ...
To check the NAS chassis, try this: Turn off your RNDP6350 then pull-out all drives but make sure to label the drives from which bay you have pull it out. Then, turn on your RNDP6350 without any drives inside it. Check if it will boot up and if it will be detected on RAIDar as well.
Did you receive any e-mail notification that a drive/s has failed?
To further isolate the problem, try also this: Turn off your RNDP6350 then pull-out all drives but make sure to label the drives from which bay you have pull it out. Then insert another drive that is NOT a member of the existing array then turn on your NAS. Check if it will boot up completely and if you will be able to initially set it up.
- Edited
Did you receive any e-mail notification that a drive/s has failed?
To further isolate the problem, try also this: Turn off your RNDP6350 then pull-out all drives but make sure to label the drives from which bay you have pull it out. Then insert another drive that is NOT a member of the existing array then turn on your NAS. Check if it will boot up completely and if you will be able to initially set it up.
- Edited
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
