NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.

Forum Discussion

zero101's avatar
zero101
Aspirant
Mar 16, 2018

ReadyNas stuck on Welcome screen

Hi there,

After several years of faithfull service my RN51600 has developed a fault.

 

After a recent power glitch my RN51600 never initalises past the Welcome screen, with its fan going at full speed.

No other electronics connected to the same power point has a problem (modem, switches, other NAS etc).

 

I have tried removing the hard drives and performing a reset, nothing happens, only get the welcome screen.

I have tried just fitting a blank drive, no change.

 

Is there something I am missing, or do I have a real hardware failure?

 

If this is a hardware failure, how do I get tech support help (I'm in Australia)?

 

Thanks.

5 Replies

Replies have been turned off for this discussion
  • StephenB's avatar
    StephenB
    Guru - Experienced User

    The hardware warranty on the RN516 is five years for the original purchaser.  If you purchased one of the very early units your warranty might be expiring very soon.  So perhaps start with verifying your warrranty status on my.netgear.com.

     

    RAIDar should see the NAS if you power it up with no disks installed (and give you a no-disk status).  If it isn't doing that (and maybe even if it is), then contact support for an RMA (my.netgear.com, click "my support", then "contact support", and then "replace my defective netgear product").

     

     

  • mdgm-ntgr's avatar
    mdgm-ntgr
    NETGEAR Employee Retired

    An alternative would be to go to www.netgear.com/support and fill out the Contact Us form for a hardware failure.

     

    Support will ask for your Proof of Purchase so get that ready.

     

    Let us know how you get on.

    • zero101's avatar
      zero101
      Aspirant

      Hi there, unfortunately I can't find my original reciept and without proof of purchase support can't (won't) help me.

      Even though I am the person who registered this device and the serial no will say how much warranty is left.

       

      They will not even look at my NAS and quote for repair.

       

      Since I live in Australia we do have consumer laws which prevent manufactures avoiding their obligations.

       

      I have asked our local governments consumer protection department to step in.

       

      Thanks for your help anyway.

      • mdgm-ntgr's avatar
        mdgm-ntgr
        NETGEAR Employee Retired

        Asking for proof of purchase is reasonable under Australian Consumer Law

         

        It's advisable to keep an electronic copy of the receipt in case the original is damaged or misplaced.

         

        Once you find the receipt it should be straightforward to get your RMA, but if you still have problems after finding your receipt let me know.

NETGEAR Academy

Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology! 

Join Us!

ProSupport for Business

Comprehensive support plans for maximum network uptime and business peace of mind.

 

Learn More