NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Ultra 2 LAN slow
Ciao. I have a Readynas Ultra 2 with 2x WD RED 3 TB. I used to have the HDs in a Raid 0 configuration... but few days ago without warning I have lost everything. My previous configuration was the...
Thanks for the reply!
The Resynch now say 5% complete, remaining time 542 hr 54 min, speed 1415 KB/sec.
Is that normal? The disks are empty still.
I have used Data Lifeguard Diagnostic for Windows (by WD) ona PC.
Nothing was found.
The status of the SMART is green, however I have sent the log to WD support just be sure, since one of the disk has the data below that look suspicious to me.
Modello: WDC WD30EFRX-68AX9N0
Seriale: WD-WMC1T1244597
Firmware: 80.00A80
Attributo SMART
Raw Read Error Rate 43
Spin Up Time 6108
Start Stop Count 10144
Reallocated Sector Count 0
Seek Error Rate 70
Power On Hours 18443
Spin Retry Count 0
Calibration Retry Count 0
Power Cycle Count 164
Power-Off Retract Count 115
Load Cycle Count 10028
Temperature Celsius 31
Reallocated Event Count 0
Current Pending Sector 0
Offline Uncorrectable 0
UDMA CRC Error Count 0
Multi Zone Error Rate 0
ATA Error Count 0
The Resynch now say 5% complete, remaining time 542 hr 54 min, speed 1415 KB/sec.
Is that normal? The disks are empty still.
I have used Data Lifeguard Diagnostic for Windows (by WD) ona PC.
Nothing was found.
The status of the SMART is green, however I have sent the log to WD support just be sure, since one of the disk has the data below that look suspicious to me.
Modello: WDC WD30EFRX-68AX9N0
Seriale: WD-WMC1T1244597
Firmware: 80.00A80
Attributo SMART
Raw Read Error Rate 43
Spin Up Time 6108
Start Stop Count 10144
Reallocated Sector Count 0
Seek Error Rate 70
Power On Hours 18443
Spin Retry Count 0
Calibration Retry Count 0
Power Cycle Count 164
Power-Off Retract Count 115
Load Cycle Count 10028
Temperature Celsius 31
Reallocated Event Count 0
Current Pending Sector 0
Offline Uncorrectable 0
UDMA CRC Error Count 0
Multi Zone Error Rate 0
ATA Error Count 0
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
