NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
ReadyNAS Ultra 2 LAN slow
Ciao. I have a Readynas Ultra 2 with 2x WD RED 3 TB. I used to have the HDs in a Raid 0 configuration... but few days ago without warning I have lost everything. My previous configuration was the...
I have 6 TB overall but they are empty.
The Resynch started more the 24 hours ago..
Should remove the volumes and try to put only one HD in a FlexRaid config, just to see if transfer speed get back to normal?
I am concern also about the Seek Error Rate 70.
His twin brother doesn't show those numbers:
Attributo SMART
Raw Read Error Rate 0
Spin Up Time 5908
Start Stop Count 10320
Reallocated Sector Count 0
Seek Error Rate 0
Power On Hours 18455
Spin Retry Count 0
Calibration Retry Count 0
Power Cycle Count 166
Power-Off Retract Count 118
Load Cycle Count 10201
Temperature Celsius 32
Reallocated Event Count 0
Current Pending Sector 0
Offline Uncorrectable 0
UDMA CRC Error Count 0
Multi Zone Error Rate 0
ATA Error Count 0
The Resynch started more the 24 hours ago..
Should remove the volumes and try to put only one HD in a FlexRaid config, just to see if transfer speed get back to normal?
I am concern also about the Seek Error Rate 70.
His twin brother doesn't show those numbers:
Attributo SMART
Raw Read Error Rate 0
Spin Up Time 5908
Start Stop Count 10320
Reallocated Sector Count 0
Seek Error Rate 0
Power On Hours 18455
Spin Retry Count 0
Calibration Retry Count 0
Power Cycle Count 166
Power-Off Retract Count 118
Load Cycle Count 10201
Temperature Celsius 32
Reallocated Event Count 0
Current Pending Sector 0
Offline Uncorrectable 0
UDMA CRC Error Count 0
Multi Zone Error Rate 0
ATA Error Count 0
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
