NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Remove inactive volumes to use the disk. Disk #1,2,3.
My first attemt looks to have failed. Sorry if this is a repeat. My network started to have files access issues and after rebooting everything but the NAS i had nothing left but now I have lost my X...
Ok so it turns out my disk with some ATA errors was enough to stop the system from coming up. Even thou it was still maked as good. Power down and remove the bad disk. Power up and my system and shares returned but degraded. Put in a new drive and it rebuilt fine.
All good now.
The puzzle is guessing which data volume is "inactive". My guess is that it's the bottom one. You could try deleting it - but if the guess is wrong you will lose your data.
Another option is to use paid support (my.netgear.com).
Thanks StephenB Guru,
Yes thats looks to be my plan unless something happens over new years.
My be my Netgear will have a change of plans once its changes to the new year.
Thanks for the responce on a long weekend.
Regards
Greg
Ok so it turns out my disk with some ATA errors was enough to stop the system from coming up. Even thou it was still maked as good. Power down and remove the bad disk. Power up and my system and shares returned but degraded. Put in a new drive and it rebuilt fine.
All good now.
Gwilli14 wrote:
Ok so it turns out my disk with some ATA errors was enough to stop the system from coming up. Even thou it was still maked as good.
If the ATA errors continue to rise, then I suggest replacing the disk. If another disk failed (and was replaced), this issue could result in data loss.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
