NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RN102 stuck at booting
After i preformed a Firmware update my NAS did not become visible in the network. After a while rebooted it, no result.
Tried to reinstall os trough boot option, no result.
Tried to boot from usb, no result
Tried to boot from usb with previous firmware (before update) no result.
I have data on the disks so a factory restore is no option...
What can i do to get my NAS back working
After manually applying a one-off update that would have been done if the workaround had been used the system was able to boot up on 6.6.1.
7 Replies
Replies have been turned off for this discussion
Which firmware did you update from/to ?
6.2.2
to 6.6.1
I guess you didn't use this workaround?
- Well... this is the first time i see this one... so, no. As it is now, i can not reach or find the nas in my network so this is not a solution anymore i think
Sent you a PM
After manually applying a one-off update that would have been done if the workaround had been used the system was able to boot up on 6.6.1.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
