Forum Discussion

Aspirant

Dec 13, 2017

Solved

RN10200 not visible

hi, power LED on. strat up blink few second only. network port green color LED blinking. but no ip or discover to RAIDar how to pix that

Other Discussions

RN10200

sanjeewakuku
Dec 26, 2017
i have using usbrecovery.v2.0.T14.support. USB flash and problem solved

sanjeewakuku

Aspirant

Dec 15, 2017

msq wrote:
Ok - factory default already erased all data on the disk....

You can try OS reinstall - this is next step after 'factory default'.

power off and press reset button and plug to power after slelct boot menu OS reinstall
Disk 2 LED lights. and press reset button.

result> power LED blink few seconds and LED stable.

not visibel yet. :(

msq

Apprentice

Dec 15, 2017

Both - factory reset and os reinstall can take 5 to 15 minutes. Additionally:

Factory default. Initiates a short disk test that takes approximately 5 minutes. After the disk test, a 10-minute time-out period begins, during which all LEDs blink simultaneously.

Please - give it few more minutes.

sanjeewakuku
Aspirant
Dec 15, 2017
msq wrote:
Both - factory reset and os reinstall can take 5 to 15 minutes. Additionally:
Factory default. Initiates a short disk test that takes approximately 5 minutes. After the disk test, a 10-minute time-out period begins, during which all LEDs blink simultaneously.

Please - give it few more minutes.

ok now again OS reinstall
select Disk 2 LED light and reset button.
power LED blink few second and continues LED on now. im waiting 15 min. and i will post reply whats happend.
sanjeewakuku
Aspirant
Dec 16, 2017
not change. same issue. :( :( RN10200 not visible
JohnCM_S
NETGEAR Employee Retired
Dec 21, 2017
Hi sanjeewakuku,

Do you have RAIDar installed on a computer? If yes, does RAIDar detect the NAS even if there is no disk inside it?

Regards,
JohnCM_S
NETGEAR Community Team
JohnCM_S
NETGEAR Employee Retired
Dec 26, 2017
Hi sanjeewakuku,

We’d greatly appreciate hearing your feedback letting us know if the information we provided has helped resolve your issue or if you need further assistance.

If your issue is now resolved, we encourage you to mark the appropriate reply as the “Accept as Solution” or post what resolved it and mark it as solution so others can be confident in benefiting from the solution.

The Netgear community looks forward to hearing from you and being a helpful resource in the future!

Regards,
JohnCM_S
NETGEAR Community Team
sanjeewakuku
Aspirant
Dec 26, 2017
i have using usbrecovery.v2.0.T14.support. USB flash and problem solved