NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN104 can not accesssed
Hello. Booting from 104 USB Failed! It is now indicated as. BOOTMENU could not be accessed by starting with the reset button pressed. Also, I used USB Recovery and the power was turned off after ...
Retired_Member
Welcome to the Community!
The NAS turning off after initiating USB recovery means the recovery was successful.
Have you tried running the USB Recovery again using a different USB stick? Have you tried updating the Firmware before this happened?
Please try to download RAIDar as well and check on the Status after USB recovery attempt.
If the same routine happened but still the NAS is not booting, you may want to contact Support at this time and have it checked as it may need RMA.
HTH
Regards
Marc_V wrote:
If the same routine happened but still the NAS is not booting, you may want to contact Support at this time and have it checked as it may need RMA.
This would be a warranty return, so check the warranty status before contacting support.
The warranty is three years for the original purchase.
Thank you for your reply.
I tried another USB stick as well, and the results were the same.
Also, there was no attempt to update the firmware before this symptom appeared.
What's puzzling is that even if I didn't press the backup button, the USB recovery started by inserting the USB stick.
Last but not least, I bought it more than 6 years ago, so support is broken.
Could you tell me what I should do next?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
