NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RN104 External USB disk disconnect randomly
I have a Samsung D3 station 5GB drive that I have connected to the USB 3 drive on my ReadyNAS104. The backup drive is formatted NTFS. I run 8 backup jobs each night. Usually they run fine. Sometim...
Hi jhyland,
There is a current investigation regarding USB detection on the new firmware. For now, a work around is to reboot the NAS after connecting the USB.
Regards,
Hi - Thanks for the info. Just to be clear I do not physically disconnect the device. The USB cable remains connected between the nas and USB drive. At an unpredictable time the NAS reports that it is disconnected from the drive. Sometimes the NAS will reconnect to it on its own before I notice it (such as when it happens overnight). If I log into the interface and see that it is not connected, doing a NAS reboot does cause the NAS to "reconnect" to the usb drive. Is this the issue that you working on? Or is my situation different? The most frustrating part is when scheduled backups fail because the NAS thinks the USB drive is disconnected.
I really cannot tell if its related to yours as well. The issue that we saw was about the NAS not mounting the USB drives properly and a reboot was needed in order to have it mounted. We are still collecting information about it as well.
For the meantime; as a work around, you can probably connect the USB to a PC on the network and setup a back-up job pointing to that PC.
Regards,
Would the logs help you?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
