NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RN10400 Nas Station starts for 1 second then turns off then starts again for 1 second continuosly
Hi, the power button and power light come on and the diplay shows an intial screen with NETGEAR STORAGE welcome, but then after a second they all turn off again, then after a few seconds that the cycle repeats, the fan done not move.
Any ideas?
Most likely a power problem. Booting without drives may help determine that. If it is that, then the next step would be trying another power brick.
3 Replies
Replies have been turned off for this discussion
Try removing the disks (labeling by slot number), and then power up again. See if it gives you a "no disks" status.
Most likely a power problem. Booting without drives may help determine that. If it is that, then the next step would be trying another power brick.
Thanks, yes with all drives removed then it started. I measured the pins on the the power supply output and only one was showing 12V. I purchased a new PS and everything works again.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
