NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
RN31400 firmware update in progress (how long will it take?)
Hi, I have logged into the web interface of our NAS and started a firmware update process. Firmware downloaded first and than it informed me that system need to be robooted. I confirmed and reboot ...
Dear Ace88:
Welcome to the Netgear Community.
I also have a RN314 and my firmware update from OS 6.6.0 to 6.6.1 only took about 5 minutes and the unit rebooted cleanly immediately after that.
That said, I have had instances where the 314 was stuck in the booting mode for quite awile. I was able to clear it by forcing the unit to power off by holding in the power button until the unit turns off. I unplugged the electric cord for about a minute and then reconnected it which instantly starts the unit. At that point, the unit did reboot cleanly.
Hope that helps.
Regards,
David
So I started by disconnecting ethernet cables from the NAS (like in this topic, my NAS is set with static IP as well). However this not helped. Afterwards I did what you suggested dschwartzer and this did the trick. Thank you.
Solved
Ace88:
Glad this worked for you. It would be appreciated if you would formally mark this as Solved so others have the benefit of this suggestion,
Regards,
David
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
