NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
RNDU6000 won't boot - faulty PSU or bricked NAS?
Hi everybody, I have a Ultra 6000 which has been performing flawlessly for about three years now. I recently upgraded my drivers to 6 x 4TB and that whole process went quite smooth. I lost some dat...
Check the NAS chassis by doing this: Turn off your NAS then pull-out all drives but make sure to label the drives from which bay you have pull it out. Then, turn on your NAS without any drives inside it. Check if it will be detected on RAIDar and if it will not automatically shut down.
If ever the NAS stays on and its detected on RAIDar, since you mentioned that you already have a back up of all of your data, I suggest that you turn off your NAS then insert the drives accordingly to their respective bays then do a factory reset on your NAS and check if same problem will occur.
If ever the NAS stays on and its detected on RAIDar, since you mentioned that you already have a back up of all of your data, I suggest that you turn off your NAS then insert the drives accordingly to their respective bays then do a factory reset on your NAS and check if same problem will occur.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
