NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
SNMP settings?
I'm having trouble connecting my ReadyNAS 4200 to my SNMP server. Here's what I've done so far: 1) I loaded the official ReadyNas SNMP MIB into my program (Paessler PRTG) 2) I set the community str...
Woops, just realized I hadn't updated this. I did in fact find the problem - there was a hard-to-find IP filter in between the ReadyNAS and the SNMP monitor. Removed the filter; all is good.
In case anyone wonders: the ReadyNas SNMP MIB is fantastic. It shows almost everything I could care about: disks, fans, status, temperature, volume storage space, etc.
Here's the link to download the ReadyNAS MIB:
I use Paessler PRTG; to import this file, here's how you do it:
1) Get Paessler MIB Importer v2 (a free download, http://www.paessler.com/tools/mibimporter)
2) Download the ReadyNAS MIB file (search for SNMP on the ReadyNAS site, http://www.readynas.com/?cat=41)
3) Launch MIB importer and select "Import | MIB File"
4) Select the MIB file and click "Open". If all is well, it will think for a minute and then say "import successful".
5) Click File | Save and save the file as "ReadyNAS.oidlib".
6) Copy the oidlib file to your PRTG server in the folder C:\Program Files\PRTG Network Monitor\snmplibs
7) Go to your PRTG user interface and right click on the ReadyNAS device. Select "Add Sensor".
8 ) In the sensor select screen, choose "SNMP".
9) Click "SNMP Library" and select "readynas.oidlib". If the file doesn't show up yet, close and re-open your PRTG user interface and it will re-scan the folder and find your oidlib file.
10) Click next and select all the monitors you care about.
Only one wish: I'd really like to be able to monitor SMART+ error counts on hard drives, but that doesn't seem to be in the current SNMP MIB.
In case anyone wonders: the ReadyNas SNMP MIB is fantastic. It shows almost everything I could care about: disks, fans, status, temperature, volume storage space, etc.
Here's the link to download the ReadyNAS MIB:
I use Paessler PRTG; to import this file, here's how you do it:
1) Get Paessler MIB Importer v2 (a free download, http://www.paessler.com/tools/mibimporter)
2) Download the ReadyNAS MIB file (search for SNMP on the ReadyNAS site, http://www.readynas.com/?cat=41)
3) Launch MIB importer and select "Import | MIB File"
4) Select the MIB file and click "Open". If all is well, it will think for a minute and then say "import successful".
5) Click File | Save and save the file as "ReadyNAS.oidlib".
6) Copy the oidlib file to your PRTG server in the folder C:\Program Files\PRTG Network Monitor\snmplibs
7) Go to your PRTG user interface and right click on the ReadyNAS device. Select "Add Sensor".
8 ) In the sensor select screen, choose "SNMP".
9) Click "SNMP Library" and select "readynas.oidlib". If the file doesn't show up yet, close and re-open your PRTG user interface and it will re-scan the folder and find your oidlib file.
10) Click next and select all the monitors you care about.
Only one wish: I'd really like to be able to monitor SMART+ error counts on hard drives, but that doesn't seem to be in the current SNMP MIB.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
