Forum Discussion

Luminary

Jun 02, 2016

UPS issue on RN312 under OS6.5

Hi, I have an issue with my UPS. My readyNAS shows me a warning about the UPS but it's not clear for me, the info is weak. An another strange thing the ups error event is not recorded in my log :-...

Business Discussions

BrianL2

NETGEAR Employee Retired

Jun 02, 2016

Hi gyves,

Does the UPS still work despite having this unknown errors in the admin page? Which Firmware was used by the system prior the upgrade?

Kind regards,

BrianL
NETGEAR Community Team

gyves1

Luminary

Jun 03, 2016

Hi BrianL2,

Yes, my UPs works fine, (green led) and all devices are under power.

Before the offcial FW 6.5, the system was under 6.5 RC3, 6.5 RC2, and 6.4.2

Regards,

Yves

StephenB
Guru - Experienced User
Jun 03, 2016
gyves1 wrote:

Yes, my UPs works fine, (green led) and all devices are under power.

It might be good to check that the NAS is gracefully shutting down when the UPS battery drains.
- gyves1
  Luminary
  Jun 03, 2016
  I can test the UPS by unplugging the main power and see if the NAS detects the battery mode from UPS.
  - gyves1
    Luminary
    Jun 03, 2016
    gyves1 wrote:
    I can test the UPS by unplugging the main power and see if the NAS detects the battery mode from UPS.
    After the main power cut, ...the UPS has now a good status on ReadyNAS, but no trace of the power shutdown event in the ReadyNAS log :-(