UPS issues in 6.2 -- still not fixed

No. Finds it on the front port in the same fashion. UPS is there but is no match to mfg.

Nov 27 13:15:11 waystation upsdrvctl[9112]: Network UPS Tools - Generic HID driver 0.38 (2.7.2)
Nov 27 13:15:11 waystation upsdrvctl[9112]: USB communication driver 0.32
Nov 27 13:15:11 waystation upsdrvctl[9112]: No matching HID UPS found
Nov 27 13:15:11 waystation upsdrvctl[9112]: Driver failed to start (exit status=1)
Nov 27 13:15:11 waystation upsdrvctl[9112]: Network UPS Tools - UPS driver controller 2.7.2

when plugged in back:

generic-usb 0003:051D:0002.0001: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g9 .D USB FW:g9 ] on usb-0000:00:1d.1-1/input0


when plugged in front:

generic-usb 0003:051D:0002.0002: hiddev0: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1000 FW:7.g9 .D USB FW:g9 ] on usb-0000:00:1a.1-2/input0

I'm surprised that it doesn't match in upsdrvctrl....

Nov 27 13:15:11 waystation upsdrvctl[9112]: Network UPS Tools - Generic HID driver 0.38 (2.7.2)
Nov 27 13:15:11 waystation upsdrvctl[9112]: USB communication driver 0.32
Nov 27 13:15:11 waystation upsdrvctl[9112]: No matching HID UPS found
Nov 27 13:15:11 waystation upsdrvctl[9112]: Driver failed to start (exit status=1)

Could it be missing an entry for the APC? You guys are running NUT 2.7.2, so I doubt it's this problem, but I'm not sure how to start it in debug mode (that whole systemd thing).

http://comments.gmane.org/gmane.comp.mo ... .user/6719