NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Vista Home Premium/Duo V2 - mapped connection dropping
Hello-- Not sure where to start on fixing this. I've already Googled and tried a few solutions (including this one http://support.microsoft.com/kb/297684) even though none seem to apply to my exact...
The logs all say the same thing: system power on scheduled for [time/date], with the next entry being system is up. Those two entries repeat over and over, no problems (I do have the ReadyNAS on a schedule where it is off several days a week).
The smart stats for each disk are almost identical, as follows:
SMART Information for Disk 1
Model: WDC WD10EFRX-68JCSN0 931 GB
Serial Number: WD-WMXXXXXXX
Firmware Version: 01.01A01
SMART Attribute Raw Read Error Rate: 0
Spin Up Time: 3416
Start Stop Count: 533
Reallocated Sector Count: 0
Seek Error Rate: 0
Power On Hours: 741
Spin Retry Count: 0
Calibration Retry Count: 0
Power Cycle Count: 104
Power-Off Retract Count: 95
Load Cycle Count: 437
Temperature Celsius: 28
Reallocated Event Count: 0
Current Pending Sector: 0
Offline Uncorrectable: 0
UDMA CRC Error Count: 0
Multi Zone Error Rate: 0
ATA Error Count: 0
I have thought about the duplicate IP address issue, but don't know how to go about assigning the ReadyNAS a fixed address outside the range the router is handing out on the fly. Can you point me to a thread with instructions on doing that?
The smart stats for each disk are almost identical, as follows:
SMART Information for Disk 1
Model: WDC WD10EFRX-68JCSN0 931 GB
Serial Number: WD-WMXXXXXXX
Firmware Version: 01.01A01
SMART Attribute Raw Read Error Rate: 0
Spin Up Time: 3416
Start Stop Count: 533
Reallocated Sector Count: 0
Seek Error Rate: 0
Power On Hours: 741
Spin Retry Count: 0
Calibration Retry Count: 0
Power Cycle Count: 104
Power-Off Retract Count: 95
Load Cycle Count: 437
Temperature Celsius: 28
Reallocated Event Count: 0
Current Pending Sector: 0
Offline Uncorrectable: 0
UDMA CRC Error Count: 0
Multi Zone Error Rate: 0
ATA Error Count: 0
I have thought about the duplicate IP address issue, but don't know how to go about assigning the ReadyNAS a fixed address outside the range the router is handing out on the fly. Can you point me to a thread with instructions on doing that?
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
