NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
Where is the resync button in RAIDiator 4.1.15 [1.00a043]
Got the following tonight: A SATA reset has been performed on one or more of your disks that may have affected the RAID parity integrity. It is recommended that you perform a RAID volume resync ...
Well, I left the scheduling live on the NV+ after the disk 3 problem. So, Wednesday evening the 7th at 7pm, the NAS powered up, and automagically started to do the resynv. It then continued and ran my 4 backups, and was scheduled to power down at 4:15am. Due to the resync running, it powered down after it finished, at 8:38am, Backups ran correctly last night the 8th/9th. FrontView shows:
Configuration: RAID Level 5, 3 disks Status: Redundant RAID Disks:
Ch 1 : Seagate ST31000322CS [931 GB] 929 GB allocated Ch 2 : Seagate ST31000322CS [931 GB] 929 GB allocated Ch 3 : Seagate ST31000528AS [931 GB] 929 GB allocated Available Disks:Ch 4 : Seagate ST31000528AS [931 GB] 929 GB free So the resync cleaned up parity on disk 3 and things are back to normal, no disk problems to worry about. And the message that got sent telling me where the resync command is located is bogus and should be updated in the next release.
Sounds like disk 3 may be bad from looking at that. There would likely be some additional information in the logs e.g. the ones showing SMART stats of your disks that confirms this.
Your volume has little data on it. You should make sure you have an up to date backup and then replace the failed disk.
You can hook the failed disk up to your PC and test it using SeaTools if you want to.
Well, I left the scheduling live on the NV+ after the disk 3 problem. So, Wednesday evening the 7th at 7pm, the NAS powered up, and automagically started to do the resynv. It then continued and ran my 4 backups, and was scheduled to power down at 4:15am. Due to the resync running, it powered down after it finished, at 8:38am, Backups ran correctly last night the 8th/9th. FrontView shows:
Configuration: RAID Level 5, 3 disks Status: Redundant RAID Disks:Ch 1 : Seagate ST31000322CS [931 GB] 929 GB allocated Ch 2 : Seagate ST31000322CS [931 GB] 929 GB allocated Ch 3 : Seagate ST31000528AS [931 GB] 929 GB allocated Available Disks:Ch 4 : Seagate ST31000528AS [931 GB] 929 GB free So the resync cleaned up parity on disk 3 and things are back to normal, no disk problems to worry about. And the message that got sent telling me where the resync command is located is bogus and should be updated in the next release.
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
