latest firmware is installed.
I have created 2 SSID's
1 SSID with only 2.4GHZ. If i connect to other SSID, after trying to reconnect, it shows me password error, if i try again it reconnects. ( Default VLAN1)
2SSID with 2.4GHZ and 5GHZ does not have that problem. ( VLAN20)
Both SSID are in the same group.
WNDAP360 are being used.
Anyone can help me with this?
The issue is, if bandsteering is enabled, causes the problem
The devices are Iphones.
As i mentioned before, if radio 2.4 and 5 ghz is enabled. and you want use only the 2.4 in one ssid with bandsteering enabled causes the problem.
This should not be like that.
SSID1 with only 2.4ghz
SSID 2 with 2.4 and 5ghz.
As i wrote before, band steering cannot be enabled or disabled per SSID, it is global config.
I will send tonight the config.
Thanks for your help