NETGEAR is aware of a growing number of phone and online scams. To learn how to stay safe click here.
Forum Discussion
Solved
WNDAP360 VLAN
Hello, i have WNDAP360 configured as Access-Point with Multi-SSID. I only found option to tag the SSID into one VLAN. What i have to do, to configure multiple tagged VLANs over a SSID? At the oth...
- Ensure both APs are in LoS (Line of Sight) since you are trying on 5 GHz radio. If yes and still if you see an issue we may have to do remote debugging. Let us know.
Hi,
thanks for reply. Do i have to configure an SSID for Bridge-Mode? The MAC-Address from Bridge-Mode is the same MAC as SSID-Profile1.
daniel
Daniel,
The bridge mode does not depend on an SSID configuration. Very common that the bridge MAC is the same as the first ESSID MAC.
All information required to configure a Point-to-point bridge is listed in the Table 26 on p.92 ff. - the MAC address is always the other end bridge MAC - which must be configured to a bridge mode of course, too.
Regards,
-Kurt
Hi,
i bought a second AP360 and setup the bridge with 2.4Ghz It works! But what about 5Ghz? i could not setup the bridge with 5Ghz and WPA2-PSK. Can you help again?
Check WNDAP360 Reference Manual 2 Nov 2015 p.91 Figure 54 for configuring the 5 GHz interface with the 802.11a/na tab. SImilar, you have to configure the first MAC/ESSID of the remote 5 GHz unit.
i did the setup similar to 2,4Ghz. but the bridge wont come up. there are any special settings like channel or something else? there is another thread where a user had the same problem with an wnd930. (https://community.netgear.com/t5/Business-Wireless/WND930-wireless-point-to-point-bridge-does-not-work-in-5GHz-with/m-p/1160645#M2275)
NETGEAR Academy
Boost your skills with the Netgear Academy - Get trained, certified and stay ahead with the latest Netgear technology!
Join Us!
